Yamaha O2R Manual Do Utilizador

Internal Effects

The 02R features two internal multi-effects stereo processors: Effect 1 and 
Effect 2. These are fed by AUX 7 and AUX 8, and the processed signals are 
returned via EFF 1 RTN and EFF 2 RTN, respectively. The auxiliary sends 
can be configured pre-fader or post-fader. Effects can be applied to input 
channels, the tape return channels, or the stereo output channel. Effects are 
organized into programs. There are 40 preset effects programs (1 through 
40) and 88 user effects programs (41 through 128 plus an UNDO buffer) for 
you to store your own settings.

There are two different ways to access the internal effects sends:

These buttons access the AUX pages that set the auxiliary send levels for 
the recording console.

The [AUX 7] and [AUX 8] buttons are routed to the internal effects unit. 
Use them to set the send levels to the corresponding effects unit and select 
pre or post fader. These buttons also allow you to select and set the effects 
parameters.

The channel aux send level controls for each aux send are displayed on two 
pages. The first page shows MIC/LINE aux controls. The second, TAPE 
and effects returns aux controls.

These buttons and controls set the auxiliary send levels for the currently 
selected channel.

•

The [AUX 1] to [AUX 8] buttons allow you to select the auxiliary buses 
you want to send the selected channel signal to.

•

The SEND LEVEL rotary encoder is used to set the level—indicated by 
the adjacent LED bargraph.

•

The [ON] button is used to turn the send on or off. It allows you to 
make easy A-B comparisons.