Yamaha O2R Manual Do Utilizador
Groups and Pairs
183
02R User’s Guide
Grouping Mutes
The 02R also allows you to group channel status controls for multiple
channel control using only one channel ON button. The channels in a
group can be on or off depending on their status when they were grouped.
Pressing a channel ON button toggles the status of all the channels in the
group. There are four groups available: E, F, G, and H.
channel control using only one channel ON button. The channels in a
group can be on or off depending on their status when they were grouped.
Pressing a channel ON button toggles the status of all the channels in the
group. There are four groups available: E, F, G, and H.
Shown below is the GROUP 2/2 page—Mute Group. You can group the
input channels—MIC/LINE 1 through 16 and LINE 17/18 through
23/24—and the tape and effect returns—TAPE 1 through 16, EFF1 and
EFF2:
input channels—MIC/LINE 1 through 16 and LINE 17/18 through
23/24—and the tape and effect returns—TAPE 1 through 16, EFF1 and
EFF2:
The channels are listed in two main rows with the four group icons below
each channel number.
each channel number.
On the right side of the page are the “Enable” group select icons. You can
change the status of the channels within a group by disabling the group by
selecting the corresponding icon (a group is enabled when its icon is
highlighted) and pressing the [ENTER] button. The LEDs inset in the [SEL]
buttons of the channels in the group will flash and they will be ungrouped
temporarily, allowing you to adjust the individual channel status of the
group members.
change the status of the channels within a group by disabling the group by
selecting the corresponding icon (a group is enabled when its icon is
highlighted) and pressing the [ENTER] button. The LEDs inset in the [SEL]
buttons of the channels in the group will flash and they will be ungrouped
temporarily, allowing you to adjust the individual channel status of the
group members.
Note:
A channel can only be assigned to one group. If you attempt to assign a
channel to more than one group, the message “Duplicate Grouping!” appears.
1.
Use the [GROUP] button
to locate the GROUP 2/2
page.
to locate the GROUP 2/2
page.
2.
Use the CURSOR buttons
to select from group E
through H.
to select from group E
through H.
3.
Use the [SEL] buttons to
add or remove channels
to and from the selected
group.
add or remove channels
to and from the selected
group.
Another method is to use
the CURSOR buttons to
select the channels and
press the [ENTER] button.
the CURSOR buttons to
select the channels and
press the [ENTER] button.
4.
Select a “Enable” group
icon and turn it on or off
by pressing the [ENTER]
button.
icon and turn it on or off
by pressing the [ENTER]
button.
When a group is off, the
LEDs of the channels
flash. You can change
the channel status of
any channel in the
group.
LEDs of the channels
flash. You can change
the channel status of
any channel in the
group.
Note:
Stereo-pair channels
are added or removed
together.
together.
GROUP