Yamaha O2R Manual Do Utilizador
Specifications
251
02R User’s Guide
Error Messages
Follow the corrective actions described below when the error messages are shown on the display:
Error Message
Corrective Action
2TR-D1 No Input!
Correct digital signal is not input to 2TR-D1.
(C-R monitoring is not available.)
(C-R monitoring is not available.)
2TR-D2 Cascade Disabled
2TR-D2 cannot be routed to STEREO BUS.
(Incorrect word clock setting)
(Incorrect word clock setting)
2TR-D2 No Input!
Correct digital signal is not input to 2TR-D2.
(C-R monitoring is not available.)
(C-R monitoring is not available.)
2TR-D3 No Input!
Correct digital signal is not input to 2TR-D3.
(C-R monitoring is not available.)
(C-R monitoring is not available.)
Automix Aborted!
Automix data was aborted.
(You can undo the operation.)
(You can undo the operation.)
Automix Disabled!
Time code was input, but automix is disabled.
Automix REC Ready!
Ready for recording automix.
Automix Recording!
Recording automix now.
Automix Running!
Automix is now running.
Automix Updated!
Automix has been updated.
(You can undo the operation.)
(You can undo the operation.)
Byte Count Error!
Byte count for the received bulk data is not correct.
Can't assign 2TR-D1!
2TR-D1 cannot be routed to line 17/18. (The signal at 2TR-D1 is not
syncing with the 02R, or 2TR-D1 has been selected in the C-R mon-
itor section.)
syncing with the 02R, or 2TR-D1 has been selected in the C-R mon-
itor section.)
Can't assign 2TR-D2!
2TR-D2 cannot be routed to line 19/20. (The signal at 2TR-D2 is not
syncing with the 02R, or 2TR-D2 has been selected in the C-R mon-
itor section.)
syncing with the 02R, or 2TR-D2 has been selected in the C-R mon-
itor section.)
Can't select SLOT3!
SLOT3 cannot be selected for digital input.
(The I/O card is not in SLOT3.)
(The I/O card is not in SLOT3.)
Can't select SLOT4!
SLOT4 cannot be selected for digital input.
(The I/O card is not in SLOT4.)
(The I/O card is not in SLOT4.)
Can't select WORD CLOCK!
Not available as a word clock source.
Cannot Copy Title!
You cannot copy the title from the memory that has no data.
Cannot Paste Title!
You cannot paste the title to the memory that has no data.
Check Sum Error!
Check sum of the received bulk data is not correct.
Code Mismatch!
Product code for the received bulk data is not correct.
DIGITAL I/O Error!
Incoming signal from SLOT DIO is not syncing with the 02R. The
synchronization system has not been configured successfully. Or, if
the sync system has been configured, this message may still appear
if the clock sent from the MTR is unstable until the digital MTR enters
CHASE status. You can select whether this message will be shown or
not. (see “Preferences” on page 198 of the
synchronization system has not been configured successfully. Or, if
the sync system has been configured, this message may still appear
if the clock sent from the MTR is unstable until the digital MTR enters
CHASE status. You can select whether this message will be shown or
not. (see “Preferences” on page 198 of the
Duplicate Grouping!
You cannot duplicate the group.