Yamaha O2R Manual Do Utilizador

Mixing and Automix

These tutorials have assumed you are using your 02R with one or more of 
the optional I/O cards installed and a multitrack recorder connected. In 
this section, you will be synchronizing your multitrack recorder to the 02R. 
There are three basic ways of doing this:

•

If your multitrack recorder is equipped with a SMPTE timecode output 
connector, you use an audio cable to connect it to the SMPTE 
TIME CODE INPUT jack on the rear panel of the 02R.

•

Use an external SMPTE timecode generator if your multitrack recorder 
cannot output SMPTE time. You need to record timecode onto one of 
the tracks of your multitrack recorder and connect the output from that 
track directly to the SMPTE TIME CODE INPUT jack on the rear panel 
of the 02R.

•

Use a MIDI sequencer to send MTC (MIDI timecode) or MIDI Clocks to 
the 02R as well as your multitrack recorder. Connect a MIDI cable to 
the MTC TIME CODE INPUT jack on the rear panel of the 02R.

There is an additional option—you can automate the 02R using its internal 
timecode generator. However, you cannot synchronize with an external 
device as the 02R has no timecode output connectors. This mode is effective 
for learning how to use the automix system.

The 02R supports the following frame rates:

•

30—30 frames per second.