Yamaha NS-P276 Manual Do Utilizador

 

You can place the front and surround speakers (and 
surround back speaker in an NS-P276 system) on a 
shelf or rack, set them on the floor, or mount them 
on a wall or speaker stand.

 

Affix screws to a firm wall or wall support as 
shown below. (Use tapping screws 3.5 to 4mm 
in diameter.)

 

Suspend the speaker by mounting the holes in 
the speaker’s rear panels on the protruding 
screws.

 

• Each front or surround speaker weighs 0.8 kg 

(1.8 lbs.). Do not mount the speakers on thin plywood 
or on a wall made of soft surface material. Otherwise, 
the screws may pull out of the surface and the speak-
ers may fall, possibly damaging the speakers or caus-
ing personal injury.

• Do not affix the speakers to a wall using nails, adhe-

sives, or unstable hardware. Long term use and vibra-
tion may cause the speakers to fall.

• To avoid accidents resulting from tripping over loose 

speaker cables, affix the cables to the wall.

• Mount the speakers in a wall location that will be 

unlikely to result in injury to an individual’s head.

 

You can mount the front, surround, and surround 
back speakers on a speaker stand. When you 
installing the speaker on commercially available 
speaker stand, you need to attach a bracket to the 
bottom of the speaker using a screw.

Holes

10 mm

Minimum 

20 mm

70 mm

70 mm

Wall/ wall

support

Rear view

70 mm

Insert only M4 
screws through 
the outside holes.

60 mm (2-3/8”)

Bracket (AAX34790)
(option)

M4 screw (AAX12390)
(option)

 

02_UB_main_E.fm  Page 5  Monday, December 5, 2005  11:02 AM