Yamaha QY8 Manual Do Utilizador
36
Programming the
6
Sequencer Parts
Once you’ve created an accompaniment, you might like
to add a melody line and other parts that will finish off
your composition. Melody lines and other musical
elements can be recorded using the QY8’s four “parts”,
as described below. It’s also possible to use only the four
parts, without an accompaniment.
to add a melody line and other parts that will finish off
your composition. Melody lines and other musical
elements can be recorded using the QY8’s four “parts”,
as described below. It’s also possible to use only the four
parts, without an accompaniment.
1.
Locate the Start Point
Use the [
g
g
g
g
g] button to go to the top of the song, or use the [h
h
h
h
h]
and [
j
j
j
j
j] buttons to locate the measure from which you want to
start recording.
DETAIL
In the part programming mode the [[[[[
h
h
h
h
h]]]]] and [[[[[j
j
j
j
j]]]]] buttons step
backward or forward in 32nd-note increments when the cursor is
located at the 1 MEASURE pointer, and in increments
corresponding to the currently selected note length when the
cursor is located at any other part parameter. When the cursor is
located at the PART pointer the [[[[[
located at the 1 MEASURE pointer, and in increments
corresponding to the currently selected note length when the
cursor is located at any other part parameter. When the cursor is
located at the PART pointer the [[[[[
h
h
h
h
h]]]]] and [[[[[ j
j
j
j
j]]]]] buttons step
backward or forward in 1-measure increments.
2.
Select a Part
Move the cursor to the PART 1, 2, 3, or 4 pointer (▲) to select
the part you want to program.
the part you want to program.
01Piano
100