Yamaha QY8 Manual Do Utilizador
44
Programming the Sequencer Parts
1.
Select a Part
Move the cursor to the pointer (▲) of the part you intend to record.
2.
Engage the Real Time Record Mode
Press [ENTER] while holding the cursor up button to engage the real time
record mode. The following display will appear:
record mode. The following display will appear:
DETAIL
You can exit from the real time record mode without recording by
simply pressing the [ E N T E R ]
simply pressing the [ E N T E R ]
[ E N T E R ]
[ E N T E R ]
[ E N T E R ]
[ E N T E R ] button.
3.
Set a Quantization Value, If Required
Quantization helps to produce a “tight” recording by automatically
aligning notes to the nearest specified beat as you record. To set a
quantization value, move the cursor down to the quantization parameter
and use the [-1] and [+1] buttons to set as required. No quantization is
applied when set to “OF”. Other settings align recorded notes to the
nearest corresponding beat.
aligning notes to the nearest specified beat as you record. To set a
quantization value, move the cursor down to the quantization parameter
and use the [-1] and [+1] buttons to set as required. No quantization is
applied when set to “OF”. Other settings align recorded notes to the
nearest corresponding beat.
08Orgn1
100
QuantOF
REC