Yamaha QY8 Manual Do Utilizador

51

Move the cursor across to the end measure parameter and use the
[-1] and [+1] buttons to select the last measure in the range you
want to erase (this should be the same as the top measure if you
only want to erase one measure).

Press [ENTER] to erase the specified measures. “Completed” will
appear briefly on the display and the Erase Measure function will
automatically be exited when the specified data has been erased.
You can exit without executing the Erase Measure function by
moving the cursor up to the OPTION pointer.

Unlike the Delete Measure job, the Erase Measure job erases the
data from the specified measures only in the specified part. Also,
the data is erased but the measures remain intact (i.e. the
subsequent measures are not moved back). After an erase opera-
tion you can record new material in the resulting blank measures
as required.

Use the [ U N D O ]

[ U N D O ]

[ U N D O ]

[ U N D O ]

[ U N D O ]  key immediately after executing the Erase

Measure function if you accidentally erase the wrong measures.

Deletes the specified range of measures from all parts simultaneously.

With the cursor at the OPTION pointer use the [-1] and [+1]
buttons to select “DelMeas” on the display.

Press  [ENTER] to call the Delete Measure parameters (the top
measure parameter will be automatically selected).