Yamaha RX-V1600 Manual Do Utilizador

Press and hold MEMORY (MAN’L/AUTO FM) 
on the front panel for more than 3 seconds.
The preset group and number as well as the 
MEMORY and AUTO indicators flash. After 
approximately 5 seconds, automatic presetting starts 
from the currently selected frequency and proceeds 
toward the higher frequencies.

When automatic preset tuning is completed, the front 
panel display shows the frequency of the last preset 
station.

• Any station data stored under a preset station number is cleared 

when you store a new station under the same preset station 
number.

• If the preset number of the received stations does not reach 40 

(E8), automatic preset tuning automatically stops after 
programming all available stations.

• Only FM stations with sufficient signal strength are stored 

automatically by automatic preset tuning. If the station you 
want to store is weak in signal strength, tune into it manually 
and store it by following the procedure in “Manual preset tuning”.

■ Customized automatic preset tuning

You can specify a preset station group and a preset station 
number from which this unit stores the FM stations 
received by automatic preset tuning.

Press A/B/C/D/E and then PRESET/TUNING 
l / h on the front panel to select the preset 
station group and the preset station number 
where the first received station will be 
stored.
For example, if you select C5, the first received 
station is automatically programmed to C5 and the 
next received stations are sequentially programmed to 
C6, C7, etc.

Automatic preset tuning stops when the received stations have all 
been stored up to E8.

S t r a i g h t

C 8 : F M

8 7 . 5 0 M H z

Memory back-up
The memory back-up circuit prevents the stored data 
from being lost. However, the stored data will be lost 
in case the power cord is disconnected from the AC 
wall outlet for more than one week.