Yamaha REV100 Manual Do Utilizador
MIDI Mode
8
Setting the MIDI Receive Channel
By default, the REV100 is set to receive MIDI on all channels (OMNI mode). You can change this default with the following pro-
cedure:
cedure:
1.
Press and hold the MIDI key as you switch on the power to the REV100.
The 7-segment LED will display “
” and the current MIDI channel number alternately.
2.
Select another MIDI channel number by pressing the
or
keys.
You can select “
” (OMNI), “
” to “
”, or “
” (OFF).
3.
Press the MIDI key again to return to normal operational mode.
Real-time Parameter Change
You can send MIDI Control Change messages to the REV100. Some of these messages perform the same function as the front
panel Edit controls, others allow you access to additional parameters:
panel Edit controls, others allow you access to additional parameters:
Effect Type
Parameter Name
Controller Number
REVERB
Pre Delay
20
Reverb Time
21
Effect Level
22
High Damp
23
Filter Type (LPF/HPF)
24
Cut-off Frequency
25
STEREO REVERB
Pre Delay
20
Reverb Time
21
Effect Level
22
High Damp
23
GATE REVERB
Pre Delay
20
Gate Level
21
Effect Level
22
Reverb Time
23
High Damp
24
Release Time
25
Filter Type (LPF/HPF)
26
Cut-off Frequency
27
DELAY
Delay Time
20
Feedback Level
21
Effect Level
22
High Damp
23
Filter Type (LPF/HPF)
24
Cut-off Frequency
25
DELAY/REVERB
Delay Time
20
Feedback Level
21
Reverb Level
22
Reverb Time
23
Reverb High Damp
24
Delay High Damp
25
Filter Type (LPF/HPF)
26
Cut-off Frequency
27