Yamaha yzf-r6t 2005 manuals Manual Do Serviço
CHAS
43
EAS00709
SWINGARM AND DRIVE CHAIN
CHECKING THE DRIVE CHAIN
1. Measure:
1. Measure:
• Measure the dimension between 15-links
on the inner side
and outer side
of the
roller and calculate the dimension between
pin centers.
pin centers.
• Dimension
between pin centers = (Inner
dimension
+ Outer dimension
) / 2
• 15-link section
of the drive chain
Out of specification
→ Replace the drive
chain, front drive sprocket and rear drive
sprocket as a set.
sprocket as a set.
NOTE:
NOTE:
• While measuring the 15-link section, push
• While measuring the 15-link section, push
down on the drive chain to increase its ten-
sion.
sion.
• Perform this measurement at two or three dif-
ferent places.
2. Check:
• drive chain
Stiffness
→ Clean and lubricate or replace.
3. Clean:
• drive chain
a. Wipe the drive chain with a clean cloth.
b. Put the drive chain in kerosene and remove
b. Put the drive chain in kerosene and remove
any remaining dirt.
c. Remove the drive chain from the kerosene
and completely dry it.
15-link drive chain section limit
(maximum)
239.3 mm (9.42 in)
SWINGARM AND DRIVE CHAIN