Yamaha RX-V992 Manual Do Utilizador

1 Place this remote control unit and the other remote control unit
so that they face each other.

2 Press the LEARN button using the point of a mechanical pencil
etc.

* If there is no operation for about 30 seconds after the LEARN

button is pressed, the TRANSMIT/LEARN indicator flashes
rapidly and the current mode is canceled. If this occurs,
repeat this step.

3 If necessary, select the memory area by using the A/B/C switch
on the side panel of the remote control unit.

4 Press the key on this remote control unit in which you will store
a new function.

* If a key which cannot learn another function is pressed, the

TRANSMIT/LEARN indicator flashes rapidly and the current
mode is canceled. If this occurs, repeat this step.

* If there is no operation for about 30 seconds after a key is

pressed, the TRANSMIT/LEARN indicator flashes rapidly and
the mode before you began learning operations is restored. If
this occurs, restart from step 2.

Lights up.

This remote control
unit

Other remote
control unit

About 5–10 cm 
(2–4 in.)

Flashes slowly.