Yamaha RY20 Manual Do Utilizador
104
Changing the Effects
The send level is the amount of signal being sent to the DSP for
processing. It is set for each individual drum pad.
processing. It is set for each individual drum pad.
1
Select the Send Level display page by pressing the
[ PAGE+ ] or [ PAGE– ]
button. The current level flashes under the “
SNDLVL
” prompt.
2
Press the pad you want to modify.
3
Set the send level by rotating the Jog Dial or by using the
[ +1 ] and [ –1 ]
buttons.
The range is from “
0
” to “
7
”.
A level of “
7
” is the maximum signal level and a level of “
0
” sends no signal
to the DSP.
■
Send Level
HINT
You can also select another drum kit or pad by changing the focus area with the
[ > ]
cursor button, then selecting a drum kit or pad by rotating the Jog Dial or by
using the
[ +1 ]
and
[ –1 ]
buttons.
NOTE
You can change the Send Level for the individual pads of the preset drum kits.
Your altered settings will stay in effect until you select another drum kit.
Your altered settings will stay in effect until you select another drum kit.
PAGE –
PAGE +
PATTERN
EFFECT
A CHASE
DRUM KIT
PAD
MAIN A
PAD BANK
OTHERS
HH
SD
BD
SD
BD