Yamaha S90 XS Manual Do Utilizador

. 

Determines the mode of the S90 XS/S70 XS, Voice or Multi. As soon as “Voice” or “Multi” is selected 
here, the mode of the S90 XS/S70 XS instrument changes accordingly and the Auto Sync window 
(

) opens. After setting parameters as necessary on this window, click [Start] to execute data 

synchronization between the S90 XS/S70 XS Editor and the S90 XS/S70 XS instrument.

Clicking this switches the status of the Editor between “ONLINE” and “OFFLINE.” When “ONLINE” is 
indicated, the edited status is completely synchronized between the S90 XS/S70 XS Editor and the S90 
XS/S70 XS instrument, meaning that any parameter edit you make on the S90 XS/S70 XS Editor is 
reflected in the same parameter on the S90 XS/S70 XS instrument and vice versa. When OFFLINE is 
selected, editing on the S90 XS/S70 XS Editor will not affect the S90 XS/S70 XS instrument and vice 
versa even if the S90 XS/S70 XS instrument is connected to a computer. 
Note that the indication here is automatically changed according to the status of communication 
between the S90 XS/S70 XS Editor and the S90 XS/S70 XS instrument. For example, the ONLINE status 
changes automatically to OFFLINE when the cable is disconnected accidentally. 

Indicates that the current status is set to ONLINE. Clicking this calls up OFFLINE (

2) described below. 

Keep in mind that the ONLINE indication cannot be enabled when the MIDI Port is not set properly or the 
S90 XS/S70 XS instrument is not properly connected to a computer. 

This OFFLINE indication shows that the MIDI Port is set properly and the S90 XS/S70 XS is properly 
connected to a computer. Clicking this calls up the Auto Sync window. From the Auto Sync window, you 
can synchronize the settings between the S90 XS/S70 XS Editor and the S90 XS/S70 XS by clicking the 
[Start] button. As soon as data synchronization is completed, the Auto Sync window is closed and the 
status of the Editor changes from OFFLINE to ONLINE. 

n

When the Global, Current and Voice settings are set to “Off” and Auto Start is set to “On” in the Auto Sync 
window, clicking here changes the Editor status from OFFLINE to ONLINE without opening the Auto Sync 
window. 

This OFFLINE indication shows that the MIDI Port is not set properly or the S90 XS/S70 XS instrument is not 
connected to a computer properly. Clicking this calls up the Auto Sync window. After making sure to 
connect the S90 XS/S70 XS instrument to a computer, set the MIDI Port properly then click the [Start] 
button in the Auto Sync window to execute data synchronization between the S90 XS/S70 XS Editor and 
the S90 XS/S70 XS instrument. As soon as data synchronization is completed, the Auto Sync window is 
closed and the status of the Editor is changed from OFFLINE to ONLINE.