Yamaha WD83390 Manual Do Utilizador

New Functions in DM1000 Version 2

The following functions have been added to the DM1000 as part of the upgrade of the firm-
ware from version 1.0 to version 2.0.

•

Encoder mode now features an assignable function, ALT LAYER, which enables you to con-
trol the channel level for all 32 channels without switching between layers.  

→ page 36

•

There are now 50 assignable Encoder mode parameters.  

→ page 38

•

If an Aux Send is set to pre-fader, you can set the Pre point before or after channel mute. 
→ page 99

•

The AUX SELECT [AUX 1–8] buttons enable you to solo or unsolo Aux Sends without 
switching to the Master layer.  

→ page 107

•

You can select whether the Input Channel’s Pan setting is used when the Input Channel Solo 
signal is set to Pre Fader.  

→ page 120

•

Raising the channel faders for soloed Channels from –

∞ can unsolo the Channels.

→ page 121

•

You can simultaneously select 2TR D1 or 2TR D2, and STEREO as control room monitor 
sources.  

→ page 123

•

The on/off status of the Follow Pan button is reflected in the pan and Surround Pan 
settings.  

→ page 125

•

The Surround Monitor function now supports THX Surround.  

→ page 138

•

You can simultaneously select BUS and SLOT as surround monitor sources.  

→ page 137

•

The Fader Group Master function enables you to control the overall level of the Fader group 
channels simultaneously while maintaining the relative level balance of each channel. 
→ page 150

•

The Mute Group Master function enables you to mute all channels in a Mute group 
simultaneously.  

→ page 152

•

You can add optional Add-On Effects to the preset effects.  

→ page 161

•

Any channel or parameter settings in the current scene can be copied and pasted into other 
scenes.  

→ page 171

•

You can select additional parameters for the Recall Safe function.  

→ page 170