Yamaha YPG-635 Manual Do Utilizador
100
DGX-630/YPG-635 Owner’s Manual
Saving and Loading Data
This operation saves a user song (song numbers 031–035) to USB flash memory.
1
Make sure that a properly formatted
USB flash memory has been properly
connected to the instrument’s USB TO
DEVICE terminal, and that the icon is
showing in the MAIN display.
USB flash memory has been properly
connected to the instrument’s USB TO
DEVICE terminal, and that the icon is
showing in the MAIN display.
2
Press the FILE CONTROL [MENU] but-
ton.
ton.
3
Use the CATEGORY [
] and [
] but-
tons to locate the User Song Save item.
The SOURCE FILE—a user song name—will
be highlighted.
The SOURCE FILE—a user song name—will
be highlighted.
4
Select the source user song.
You can press the [+] and [-] buttons simulta-
neously to select the first user song.
You can press the [+] and [-] buttons simulta-
neously to select the first user song.
5
Press the [EXECUTE] button.
The DESTINATION SONG will be high-
lighted, and a default name will automatically
be created.
The DESTINATION SONG will be high-
lighted, and a default name will automatically
be created.
6
Press the [EXECUTE] button.
A cursor will appear below the first character in
the file name.
A cursor will appear below the first character in
the file name.
7
Change the file name as necessary.
Refer to “Saving User Files (Registration
Memory) to USB Flash Memory” on page 99
for filename entry.
Refer to “Saving User Files (Registration
Memory) to USB Flash Memory” on page 99
for filename entry.
8
Press the [EXECUTE] button. The dis-
play prompts you for confirmation.
You can cancel the save operation at this point
by pressing the [-] button.
play prompts you for confirmation.
You can cancel the save operation at this point
by pressing the [-] button.
9
Press the [EXECUTE] button again, or
the [+] button, and the save operation
will begin.
The user song will be stored to the USER FILE
folder in the USB flash memory.
the [+] button, and the save operation
will begin.
The user song will be stored to the USER FILE
folder in the USB flash memory.
10
A message will appear on the display
to inform you that the operation has
finished.
to inform you that the operation has
finished.
Press the [EXIT] button to return to the MAIN
display.
display.
Save a User Song to USB Flash Memory
● To Overwrite an Existing File
If you want to overwrite a file that already exists
on the USB flash memory, use the dial or the
[+] and [-] buttons to select the file, then skip
ahead to step 7.
If you want to overwrite a file that already exists
on the USB flash memory, use the dial or the
[+] and [-] buttons to select the file, then skip
ahead to step 7.
f
r
The source user song name.
The name of the file to
be saved
Cursor
• Once the save-in-progress message appears on the display the
operation cannot be canceled. Never turn off the power or
remove the USB flash memory during this operation.
remove the USB flash memory during this operation.
CAUTION
• If an existing filename is specified the display prompts you for confir-
mation. Press [EXECUTE] or [+] if it is OK to overwrite the file, or [-]
to cancel.
to cancel.
• The amount of time it will take to perform the save operation will
depend on the condition of the USB flash memory.
NOTE