Yamaha YST-M8 Manual Do Utilizador
7
Specifications
Type
Active Servo Technology
Output power
5 W + 5 W (1 kHz, 4
Ω
)
Input sensitivity
200 mV (1 kHz, 4
Ω
at 5 W)
Input Impedance
25 k
Ω
Frequency response
80 Hz to 20 kHz
Speaker unit
6.5 cm (2.5") full-range cone, magnetic shielding
Output Impedance
600
Ω
Output level
0.9 V (at 200 mV Rated Input)
Power supply
DC 12 V
U.S.A. and Canada models
AC 120 V, 60 Hz
Europe and U.K. models
AC 230 V, 50 Hz
Australia model
AC 240 V, 50 Hz
Dimensions (W
×
H
×
D)
86 (3
3
/
8
")
×
216 (8
1
/
2
")
×
130 (5
1
/
8
") mm
Weight
0.7 kg (1 lb 9 oz.)/Right channel unit
0.6 kg (1 lb 5 oz.)/Left channel unit
0.6 kg (1 lb 5 oz.)/Left channel unit
Finish
YST-M8 W: Computer white
YST-M8 B: Black
YST-M8 B: Black
Accessories
AC adaptor
×
1
3.5 mm stereo mini plug cable
×
1
RCA plug cable
×
1
8 non skid pads
×
1
* Specifications subject to change without notice.
Non skid Pads
The pads supplied with the YST-M8 should be stuck onto
the bottom of each speaker cabinet as shown. As well as
preventing the YST-M8 from slipping around, these pads
also isolate the cabinet from the mounting surface.
the bottom of each speaker cabinet as shown. As well as
preventing the YST-M8 from slipping around, these pads
also isolate the cabinet from the mounting surface.
Controls
Front Panel (right cabinet)
(Refer to page 5)
6
(power) switch and indicator: Press the (power) switch to turn on the
YST-M8; the indicator will light up. Press it again to turn off. Before
turning on and off, turn down the VOLUME control.
turning on and off, turn down the VOLUME control.
7
VOLUME control: Use this control to set the volume level. Turn it clockwise
to increase the volume, and counterclockwise to reduce it.
to increase the volume, and counterclockwise to reduce it.
8
TONE control: This control allows frequency boost and cut up to
±
7 dB at
10 kHz. This tends to emphasize vocals, providing a warmer intimate sound.
Turn it clockwise to boost, and counterclockwise to cut.
Turn it clockwise to boost, and counterclockwise to cut.
9
(headphones) jack: Use this jack to connect stereo headphones for
monitoring. No sound is output from the speakers or the OUTPUT
(ADJ.VOL.) jack when headphones are connected.
(ADJ.VOL.) jack when headphones are connected.
English