Eizo flexscan sx2461 Manual Do Utilizador

Chapter 2  Settings and Adjustments

This function enables to turn off the Power indicator (blue) while a screen is 
displayed.

(1)  Choose <Others> from the Adjustment menu, and press 

.

(2)  Choose <Power Indicator> from the <Others> menu, and press 

.

The <Power Indicator> menu appears.

(3)  Select “Disable” with 

 or 

, and press 

.

The Power Indicator setting is completed.

When this unit is turned on, the EIZO logo appears at the center of the screen. 
Selection to display or not to display the logo is available with this function.

(1)  Press 

 to turn off the unit.

(2)  Press 

 again while pressing 

 to turn on the unit.

The EIZO Logo display/non-display function is toggled.

Set the beeper on/off for operation tone of the switches, connection error, etc.

Short beep

•  When an item is selected with 
•  When a maximum or minimum value is set with 

 / 

 / 

 / 

•  When 

 is pressed

Long beep

•  When 

 is pressed

•  When registration is performed with 

Consecutive beeps

•  When the monitor is not connected correctly
•  When the PC is not turned on
•  When a frequency out of the specified range is 

received

Beep-beep once every 15 

seconds

•  15 minutes before the power off time set by “Off 

Timer” (advance notice time)

(1)  Choose <Others> from the Adjustment menu, and press 

.

(2)  Choose <Beep> from the <Others> menu, and press 

.

The <Beep> menu appears.

(3)  Select “On” or “Off” with 

 or 

, and press 

.

The beep setting is completed.

•  The Power indicator lights up at 

power on with the default setting.

•  The logo appears with the default 

setting.