Echo SHC-225 Manual Do Utilizador

DO NOT use a metal scraper to remove dirt from the cylinder fins.

4.  Remove ignition wires from clip for cleaning.

5.  Use brush to remove dirt from the cylinder fins.

6.  Remove grass and leaves from the grid between the recoil starter 

and fuel tank.

7.  Assemble components in reverse order.

Tools Required:   T27 Torx L-Wrench, Soft Metal Brush 

Parts Required:  Screen, Gasket  

1.  Remove spark plug lead from spark plug, and remove engine cover 

(2 screws).  

2.  Place piston at Top Dead Center (TDC) to prevent carbon/dirt from 

entering cylinder.

3.  Remove spark arrestor screen cover (C), gasket (D), and screen 

(E), from muffler body.

4.  Clean carbon deposits from muffler components.

When cleaning carbon deposit, be careful not to damage the cata-

lytic element inside muffler.

5.  Replace screen if it is cracked, plugged, or has holes burned  

through.

6.  Install engine cover  and attach spark plug lead.