Adam Equipment gbc-gfc series Manual Do Utilizador
P a g e
16
© Adam Equipment Company 2011
SETTING OF PIN
•
Display will show “F2” “Pin”. This parameter allows setting of a new
password number. The default password is “0000”.
password number. The default password is “0000”.
•
Press [Tare]. The “Weight” display will show "Pin 1".
•
Enter the new password number. The “Unit Weight” display will show
dashes. Press [Tare].
dashes. Press [Tare].
•
The “Weight” display will change to "Pin 2 ", Enter the password again
and press [Tare].
and press [Tare].
•
The display will show "donE" to show the new password has been
accepted and will return to the menu. Record the new password in a
secured place.
accepted and will return to the menu. Record the new password in a
secured place.
•
To exit a parameter, press the [Zero] key.
ENABLE WEIGHING UNITS
•
Display will show “F3” “Unit”. This parameter allows weighing units to be
enabled or disabled. If enabled the weighing units will change when the
[U.Wt./Unit] key is pressed. See section 6.0.
enabled or disabled. If enabled the weighing units will change when the
[U.Wt./Unit] key is pressed. See section 6.0.
•
To enter this function press the [Tare] key.
•
The display will show the first weighing unit and if it is currently On or
Off. Press the [U.Wt./Unit] key to change the setting and then press
the [Tare] key to go to the next weighing unit. The weighing units
selected will depend upon the model and the capacity of the scales.
See Section 12.2, Service Parameters.
Off. Press the [U.Wt./Unit] key to change the setting and then press
the [Tare] key to go to the next weighing unit. The weighing units
selected will depend upon the model and the capacity of the scales.
See Section 12.2, Service Parameters.
•
Press the [Zero] key to return to the weighing mode.