Sanyo xacti vpc-cg9 Manual Do Utilizador

English

Specify the start point of the extract.
h Use the procedure below to specify the frame from which the video 

clip extract will start.

h Play the video clip until approximately the desired point, pause the 

video clip, then play the video clip one frame at a time, stopping at the 
start point of the extract. This will be the first frame of the extract.

h If the start point of the video clip is also the start point of the extract, 

proceed to step 5.

Play:
After pausing playback, press and hold the SET button to the right for 
about 2 seconds for forward playback, or to the left for reverse 
playback.
Pause:
During playback, press the SET button.
Accelerated playback:
During playback, toggle the SET button to the left or right to change 
the playback speed.
Single frame:
After pausing playback, toggle the SET button to the right to move 
forward one frame, or to the left to move back one frame.

Toggle the SET button up.
h The start point of the video clip 

extract is set, and the screen to 
specify the end point appears.

h Specify the end point of the 

extract by following the same 
procedure as in step 5.

<When joining the first and latter 
portions>
1 Toggle the SET button down.

h Each time the SET button is 

toggled down, the sections to 
delete and the sections to 
save are reversed.

2 Specify the end point of the 

extract. The frame following the 
end point of the extract will be 
the start point of the latter 
portion to be joined.

End point

Portion to be deleted

Approximate playback time