Sanyo xacti vpc-cg9 Manual Do Utilizador
133
English
OPERATION SOUNDS
3
Toggle the SET button up or down to select the desired setting, and
press the SET button.
h The screen to select operation sounds appears.
<If “TURN ON/OFF” or “AUDIO GUIDE” is selected>
press the SET button.
h The screen to select operation sounds appears.
<If “TURN ON/OFF” or “AUDIO GUIDE” is selected>
h The respective screen to enable or disable the sound appears.
h Toggle the SET button up or down to select the desired setting,
h Toggle the SET button up or down to select the desired setting,
and press the SET button.
ON:
ON:
Activates the sound.
OFF: Deactivates the sound.
<If “SHUTTER” or “KEY SW” is selected>
h The screen to select the operation sounds appears.
h Select from 8 different sounds (A to H).
h You can toggle the SET button right to preview the selected
h Select from 8 different sounds (A to H).
h You can toggle the SET button right to preview the selected
operation sound.
h If “OFF” is selected, no sound is produced.
h Toggle the SET button up or down to select the desired setting,
h Toggle the SET button up or down to select the desired setting,
and press the SET button.
<If “OPERATION VOL” was selected>
h The screen to select the volume for the operation sounds appears.
h You can select an operation sound volume from 1 (minimum) to
h You can select an operation sound volume from 1 (minimum) to
7 (maximum).
h Toggle the SET button up or down to select the volume, and press
the SET button.
4
Press the MENU button.
h The operation sound settings are completed.
h The operation sound settings are completed.
HINT
i If you keep the MENU button pressed and turn on the power, the screen to
turn the operation sounds ON/OFF appears at once. You may find this a
convenient procedure to disable the operation sounds in places you do not
want them to be audible.
convenient procedure to disable the operation sounds in places you do not
want them to be audible.