Sanyo xacti vpc-cg9 Manual Do Utilizador
23
English
CHARGING
Please charge the supplied battery pack before using it.
1
Insert the battery pack in the
battery charger.
h Insert it in the direction
battery charger.
h Insert it in the direction
indicated by the [o] mark
on the battery pack.
on the battery pack.
2
Connect the supplied power
cord to the socket on the
battery pack charger.
h Insert the connector straight
cord to the socket on the
battery pack charger.
h Insert the connector straight
and securely.
3
Plug the power plug into a
power outlet (AC 100 V to
240 V).
h Charging begins.
h During charging, the
power outlet (AC 100 V to
240 V).
h Charging begins.
h During charging, the
CHARGE indicator is lit red.
h The charging time is approx.
90 minutes.
4
When the CHARGE indicator
turns off, unplug the power
cord from the power outlet,
and remove the battery pack
from the charger.
turns off, unplug the power
cord from the power outlet,
and remove the battery pack
from the charger.
CAUTION
Do not charge the battery pack immediately after the camera has been
in continuous use for a long time
Do not charge the battery pack immediately after the camera has been
in continuous use for a long time
i The battery pack becomes hot when the camera is used continuously for a
long time. If you attempt to charge the battery pack in this state, the
CHARGE indicator may flash red and it may not be possible to charge the
battery pack. Wait until the battery pack has cooled down before
attempting to charge it.
CHARGE indicator may flash red and it may not be possible to charge the
battery pack. Wait until the battery pack has cooled down before
attempting to charge it.
Battery pack
[o] mark
To power outlet
CHARGE indicator
Socket
Power cord
CHARGE indicator