Sanyo xacti vpc-cg9 Manual Do Utilizador
English
30
SE
T
T
U
P
Turning on the camera when the power save
(sleep) mode is active
(sleep) mode is active
In order to preserve battery pack power, the power save (sleep) function
will automatically turn off the camera after 1 minute of no use during
shooting, or 5 minutes of no use during playback (factory-preset
setting).
will automatically turn off the camera after 1 minute of no use during
shooting, or 5 minutes of no use during playback (factory-preset
setting).
i When the power save mode is active, you can restore the power by any of
the following methods:
h Press the REC/PLAY button.
h Press the ON/OFF button.
h Press the [
h Press the REC/PLAY button.
h Press the ON/OFF button.
h Press the [
] or [
] button.
h Press the SET or MENU button.
h Push the zoom switch.
* When the MENU button is used to turn on the camera, the screen to set
h Push the zoom switch.
* When the MENU button is used to turn on the camera, the screen to set
the operation sounds (page 132) appears.
i After the power save mode has been active for about 1 hour, the camera
will switch to the standby mode. In this case, you can restore the power by
pressing the ON/OFF button, or by closing and then opening the monitor
unit.
pressing the ON/OFF button, or by closing and then opening the monitor
unit.
i The user can specify the time elapsed before the power save mode is
activated (page 143).
i When the camera is connected to a computer or printer, the power save
mode becomes active after about 12 hours.
Turning off the camera
1
Press the ON/OFF button for at least 1 second.
h The camera turns off.
h The camera turns off.