Kenwood TK-3131 Manual Do Utilizador
15
R
EVERT
C
HANNEL
The revert channel is the channel from which you start
scanning. So, for example, if you are on channel 1 when you
begin to scan, your revert channel is channel 1.
scanning. So, for example, if you are on channel 1 when you
begin to scan, your revert channel is channel 1.
During scan, pressing the PTT switch will automatically select
the transceiver’s revert channel (in the above example,
channel 1) and you will begin transmitting. However, if you
are currently paused on another channel after having received
a signal (in the above example, any channel other than
channel 1 – such as channel 9), pressing the PTT switch will
allow you to transmit on that channel, rather than returning to
the revert channel. Scanning will resume after 5 seconds,
unless a signal is present on the channel.
the transceiver’s revert channel (in the above example,
channel 1) and you will begin transmitting. However, if you
are currently paused on another channel after having received
a signal (in the above example, any channel other than
channel 1 – such as channel 9), pressing the PTT switch will
allow you to transmit on that channel, rather than returning to
the revert channel. Scanning will resume after 5 seconds,
unless a signal is present on the channel.