Kenwood TK-3131 Manual Do Utilizador
25
continuously transmit, this feature helps you save on battery
power consumption.
power consumption.
If you continuously transmit for 3 minutes (default value), the
transceiver will stop transmitting and a tone will sound. To
stop the tone, release the PTT switch. You can press the PTT
switch again to resume transmitting.
transceiver will stop transmitting and a tone will sound. To
stop the tone, release the PTT switch. You can press the PTT
switch again to resume transmitting.
This transceiver is also equipped with a pre-alert tone
which sounds 10 seconds before the Time-out Timer expires.
This will allow you time to finish your message before the
transceiver automatically stops transmitting.
which sounds 10 seconds before the Time-out Timer expires.
This will allow you time to finish your message before the
transceiver automatically stops transmitting.
To change the default value of 3 minutes:
1
Turn the transceiver power OFF.
2
Press and hold the MENU key while turning
the transceiver power ON (for 1 second).
the transceiver power ON (for 1 second).
3
Press the
▲ or ▼ key to select “ ”.
4
Press the MENU key to select “
”
(3 minutes) or “
” (10 minutes).
5
Press the PTT, MON, or CAL key to exit
Setting Mode.
Setting Mode.