Sansui SLEDVD329 Manual Do Utilizador

EN 24

Full 100% (for PC mode only)

Full will display the picture at the maximum size.

Point to Point (for PC mode only)

Detects the resolution of the signal of the image and it

will be shown on the screen with same amount of pixels.

Aspect Ratio

You can change to a variety of picture sizes—

Wide, Zoom, Cinema, Normal, Full 100% (for PC)

and Point to Point (for PC).

Selecting the picture size

Select “Picture ⇒ Advanced Settings ⇒ Aspect

Ratio”.

Press ◀ or ▶ to select the desired picture size, as

described below.

NOTE:

Selectable picture sizes may vary depending on the

input source or broadcast signal.

You can be select desired size of picture by

pressing PICTURE SIZE on the remote control.

•

Normal

In some cases, this image will display the size of

standard 4:3 with a black side bar.

Wide (for 4:3 format programs)

To fill the screen, the right and left edges are

extended, however; the center of the picture remains

near its former ratio.

The top and bottom edges of the picture may be hidden.

Zoom (for letter box programs with

subtitles)

To fill the width of the screen, it is extended

horizontally. However; it is only slightly extended at the

top and the bottom.
The top and bottom edges of the picture may be hidden.

A B C D E F G - - - - - - - - - - - - - - - -

Cinema (for letter box programs)

The entire picture is uniformly enlarged—it is

stretched the same amount both wider and taller

(retains its original proportion).
The top and bottom edges of the picture may be hidden.

A B C D E F G - - - - - - - - - - - - - - - -

J59C0321A_EN.indd 24

11/27/12 5:22:27 PM