Sanyo avl472 Manual Do Utilizador

Remote Control

If, after reading these operating instructions, you have additional questions related to the use of your television, please call our
toll-free help line at 1-800-263-2244.
Before calling service, please check the symptoms and follow suggested solutions.

Problem

Possible Solutions

Remote control does not operate

The batteries could be weak. Replace the batteries.

Check the orientation of the batteries.

Make sure the power cord is plugged in.

Video and Audio

Problem

Possible Solutions

No picture (screen not lit),
No sound

Dark, poor or no picture
(Screen lit), good sound

No color/dark picture/color
is not correct

Only snow and noise appear
on the screen

Dotted lines or stripes

Double images

Make sure the power cord is plugged in.

Press POWER on the TV or on the remote control.

Try another channel; it could be station trouble.

Adjust the brightness in the video setting.

Check the antenna/cable connections.

If on computer (VGA) mode, check that the computer's refresh rate on its display or

monitor menu is maximum 60Hz and 1280 x 768 resolution.

Adjust the color saturation in the video setting.

Check the antenna/cable connections.

Try another channel; it could be station trouble.

Adjust the antenna.

Move the TV away from noise sources such as cars, neon signs, or hair dryers.

Using a highly directional outdoor antenna or a cable may solve the problem.

Good picture, no sound

The sound may be muted. Press MUTE again to cancel.

Make sure the stereo mode is set to stereo or mono.

Audio noise

Communication problems may occur if infrared communication equipment (e.g.,

infrared cordless headphones) is used near the TV. Move the infrared
communication equipment away from the TV until the noise is eliminated.

Troubleshooting