Sanyo dp19640 Manual Do Utilizador

1

To turn on the TV, press POWER (POWER 

indicator on the front of the unit changes green. 

It may take approx. 10 seconds for a picture to 

appear on screen.). The starting setup function 

begins. 

Signal Type

Cable

Automatic Search

Start

2

Press   or   to select “Cable” or “Air”.

3

Press 

 or   to select “Automatic Search”, 

then press   or ENTER. 

4

Now the “Auto Setup” starts. After the starting 

setup is completed, the TV channel appears on 

the screen.
• Depending on the reception condition, it may 

take from 15 minutes to 30 minutes to complete 

memorizing digital cable channels. Please be 

patient.

If you press EXIT in the process of “Auto Setup”, 

the Starting Setup stops and changes to the normal 

screen.
When you make a menu selection, your changes 

occur immediately. You do not have to press EXIT to 

see your changes.

When you are finished programming the menus, 

press EXIT.

TV operation
1

To turn on the TV, press POWER.

(POWER indicator on the front of the unit 

changes green. It may take approx. 10 seconds 

for a picture to appear on screen.)

2

Adjust the volume level by pressing VOL + or – . 

The volume level will be indicated on the screen 

by blue bars. As the volume level increases, so do 

the number of bars. If the volume decreases, the 

number of blue bars also decreases.

3

Set the Signal Type option to the appropriate 

position (see “Air/Cable selection” on page 21).

4

Press the Direct Channel Selection (0-9, –) 

buttons to select the channel.

(If you press only channel number, channel 

selection will be delayed for a few seconds.)

•

•

•

1-9: 

Press 1-9 as needed. Example, to 

select channel 2, press 2, then press 

ENTER.

10-99: 

Press the 2 digits in order. Example, 

to select channel 12, press 1, 2, then 

press ENTER.

100-135:  Press the 3 digits in order. Example, to 

select channel 120, press 1, 2, 0, then 

press ENTER.

Press the first 3 digits, then press the – button, 

followed by the remaining number.

Example, to select channel 015-001, press 0, 1, 

5, –, 0, 0, 1, then press ENTER.

If a channel is selected with only audio content, 

“Audio only” will be displayed on the screen.

If a channel is selected with a weak digital 

signal, “Digital channel signal strength is low”  

will be displayed on the screen.

  The same program may be available on either 

an analog channel or a digital channel. You may 

choose to watch either format.

If a channel is selected to which you have not 

subscribed, “Digital channel is encrypted” will 

be displayed on the screen.

•

•

•

VHF

2-13

VHF

2-13

UHF

14-69

STD/HRC/IRC

14-36 (A) 

(W)

37-59 (AA) 

(WW)

60-85 (AAA) 

(ZZZ)

86-94 (86) 

(94)

95-99 (A-5) 

(A-1)

100-135 (100) 

(135)

01 (4A)

If a channel with no broadcast is selected, the 

sound will automatically be muted.

It may take a few seconds for a digital channel 

picture to appear on screen after being selected.

To view a signal from another device connected to 

your LCD TV, such as a VCR player, press INPUT 

SELECT, then press 

 /   or corresponding 

Number buttons (0-4), then press ENTER. You can 

select TV, Video, Component, HDMI or PC depending 

on which input jacks you used to connect your 

devices.

Press and release CH +/-. The channel automatically 

stops at the next channel set into memory.

For proper operation, before selecting channels, they 

should be set into the memory. See “Memorizing 

channels” on pages 21 and 22.

•

•

3AI0331A_En.indd   18

3AI0331A_En.indd   18

1/15/10   2:31:17 PM

1/15/10   2:31:17 PM