Sanyo dp19640 Manual Do Utilizador
8
How to attach the stand
NOTE:
• Unplug the AC cord from the AC INPUT terminal.
• Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid
• Unplug the AC cord from the AC INPUT terminal.
• Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid
any damage to the unit.
• Do not touch or press the TV-screen, glass might break under pressure.
Place the TV on its back onto a table.
Align the stand’s bottom-plate (supplied) as seen here.
It will fi t in only one direction.
Hold the unit and attach the stand slowly.
Align the stand’s bottom-plate (supplied) as seen here.
It will fi t in only one direction.
Hold the unit and attach the stand slowly.
Finally secure the bottom-plate with 2 screws (supplied).
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
•
Please assure “ ” mark on the stand is facing the LCD panel side.
How to remove the stand
When you transport this product, remove the stand and pack fl at against the back of the unit in the carton. To
remove the stand, perform the step in reverse order.
remove the stand, perform the step in reverse order.
For wall mounting, the base must be removed. To disconnect the base/stand remove the two (2) screws from the
back (see page 7).
3AI0331A_En.indd 8
3AI0331A_En.indd 8
12/26/09 9:31:16 AM
12/26/09 9:31:16 AM