Sagem f@st 1500 Manual Do Utilizador
Appendix E - Default configuration
SAGEM F@st™ 1500 Reference Manual - 288053220-03
Page E-2
Page E-2
Reproduction and communication prohibited without the written permission of
E
E
E
E
This section gives the default factory settings for the SAGEM F@st™ 1500. The
SAGEM F@st™ 1500 is set to "Router" mode by default.
SAGEM F@st™ 1500 is set to "Router" mode by default.
These default settings can be modified by a special pre-configuration of the
SAGEM F@st™ 1500.
SAGEM F@st™ 1500.
E.1 Default user name and password
Password
Empty
E.2 Default configuration on the local area network side
LAN characteristics
Function - Mode
State/Value
IP characteristics
IP address
192.168.2.1
Mask
255.255.255.0
BROADCAST, ARP, MULTICAST
Enabled
IP - SERVICES
RIP
Disabled
DHCP server activated on the LAN
192.168.2.2 to 192.168.2.254
SSID broadcasting
Enabled
ESSID
"SAGEM"
Channel
6 (when channels 1 to 13)
10 (when channels 10 to 13)
10 (when channels 10 to 13)
WEP
Enabled
"Wireless" characteristics
Only
SAGEM F@st
Only
SAGEM F@st
TM
1500WG
Keys
64 bits / Hex / Key1
(01/01/01/01/01)
(01/01/01/01/01)
E.3 Default configuration on the wide area network side
WAN characteristics
Function - Mode
State/Value
ATM characteristics
Protocol
IP/PPP/ATM
VPI
8
VCI
35
Encapsulation
VC MUX
CLASS
Traffic-type CBR
PCR 800 000 bit/s
PCR 800 000 bit/s
NAT
Enabled
Default route
ADSL interface address
DNS relay
Enabled
Firewall
Enabled
Intrusion detection
Disabled
OAM F4 and F5 (see Note)
Enabled