Sharp AR-BC320 Manual Do Utilizador
JOB PROGRAM MEMORY
6-26
Recalling a job program
1
Press the [#/P] key.
2
Touch the desired storage register
number key to recall the job from memory.
number key to recall the job from memory.
When a number key is
touched, the selection
screen will be closed
and the stored job
program will be recalled.
A number for which no
job program has been
stored cannot be
selected.
touched, the selection
screen will be closed
and the stored job
program will be recalled.
A number for which no
job program has been
stored cannot be
selected.
3
Set the number of copies as needed and
press the [COLOR COPY START (
press the [COLOR COPY START (
)]
or [BLACK COPY START (
)] key.
Copying will start with
the settings of the
recalled job program.
the settings of the
recalled job program.
Deleting a stored job program
1
Press the [#/P] key.
2
Touch the [STORE/DELETE] key to obtain
the storage register screen.
the storage register screen.
3
Select a storage register number of the
program to be deleted.
program to be deleted.
If a number key for which
no job program has
been stored is selected,
the screen will change to
the screen of step 4 on
the previous page (for
storing a job program).
no job program has
been stored is selected,
the screen will change to
the screen of step 4 on
the previous page (for
storing a job program).
4
Touch the [DELETE] key.
When the [DELETE] key
is touched, the screen in
step 3 will return and the
program will be deleted.
If the [CANCEL] key is
touched, the screen in
step 3 will return but the
program will not be
deleted. If no other
programs are to be
deleted, touch the [EXIT]
key on the screen
displayed in step 3 to
exit the job program
mode.
is touched, the screen in
step 3 will return and the
program will be deleted.
If the [CANCEL] key is
touched, the screen in
step 3 will return but the
program will not be
deleted. If no other
programs are to be
deleted, touch the [EXIT]
key on the screen
displayed in step 3 to
exit the job program
mode.
JOB PROGRAMS
PRESS PROGRAM NUMBER.
RECALL
NOTE
If any settings related to the contents of a job
program were changed in the key operator programs
after the job program was stored, the changed
settings will not be included when the job program is
recalled.
If any settings related to the contents of a job
program were changed in the key operator programs
after the job program was stored, the changed
settings will not be included when the job program is
recalled.
M NUMBER.
RECALL
STORE/DELETE
EXIT
STORE/DELETE
NOTE
If overwriting of programmed copy settings has been
prohibited in the key operator programs, you will not
be able to clear a job program. (See page 16 of the
key operator's guide.)
If overwriting of programmed copy settings has been
prohibited in the key operator programs, you will not
be able to clear a job program. (See page 16 of the
key operator's guide.)
REC LL
STORE/DELETE
A JOB PROGRAM HAS BEEN ALREADY STORED.
STORE ANOTHER PROGRAM?
CANCEL
DELETE
STORE
WhaleII_general-copy_SEC.book 26 ページ 2004年9月14日 火曜日 午前11時45分