Superior Z200 Manual Do Utilizador
This is the Internet version of the user's guide. © Print only for private use.
18
Personalizing your phone
To receive a sound or melody via Infrared
1. From standby, press
, scroll to Activate IR,
YES
.
2. When you receive the sound or melody, press
YES
to save it in My Sounds.
Increasing RingYou can choose a ring signal that rises in steps from
the lowest volume to the highest, or you can choose
a ring signal with constant volume.
the lowest volume to the highest, or you can choose
a ring signal with constant volume.
To turn increasing ring On or OffScroll to Settings,
YES
, Sounds & Alerts,
YES
,
Increasing Ring,
YES
.
Sounds & AlertsYou can choose to be notified of an incoming call
by the buzzing of the vibrating alert. You can set the
phone’s vibrating alert to On, On If Silent or Off.
by the buzzing of the vibrating alert. You can set the
phone’s vibrating alert to On, On If Silent or Off.
From Settings/Sounds & Alerts, you can also select:
• Message Alert when messages are received.
• Key Sound when using the keypad.• Minute Minder to beep after every minute
• Message Alert when messages are received.
• Key Sound when using the keypad.• Minute Minder to beep after every minute
during calls.
To set the vibrating alert
1. Scroll to Settings,
YES
, Sounds & Alerts,
YES
,
Vibrating Alert,
YES
.
2. Select the setting you want,
YES
.
Menu language
Most SIM cards automatically set the menu language
to the language of the country where you bought
your SIM card. If this is not the case, the preset
language is English.
Most SIM cards automatically set the menu language
to the language of the country where you bought
your SIM card. If this is not the case, the preset
language is English.
Note: You can always choose Automatic by pressing
8888
in standby. You can always choose
English by pressing
0000
in standby.
To change the menu language
1. Scroll to Settings,
YES
, Language,
YES
, Menus,
YES
.
2. Select a language,
YES
.
Display light
The display light can be set to Automatic, Off or On.
In automatic mode, the display light is turned off
a few seconds after you press the last key.
The display light can be set to Automatic, Off or On.
In automatic mode, the display light is turned off
a few seconds after you press the last key.
Note: If set to On, the display light consumes extra battery power and reduces standby time.