Kenwood KDC-MP6539U Manual Do Utilizador

English

   

|

   

2WARNING
To prevent injury or fire, take the following 
precautions:

•  To prevent a short circuit, never put or leave any 

metallic objects (such as coins or metal tools) inside 
the unit.

This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the 
<Demonstration mode Setting> (page 14).

•  If this unit or the connected unit (disc auto changer, 

etc.) fails to operate properly, press the Reset button. 
The unit returns to factory settings when the Reset 
button is pressed.

Reset button

If the faceplate of this unit is stained, wipe it with a 
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with 
a cloth moistened with neutral cleaner, then wipe it 
again with a clean soft dry cloth.

¤

•  Applying spray cleaner directly to the unit may affect its 

mechanical parts. Wiping the faceplate with a hard cloth or 
using a volatile liquid such as thinner or alcohol may scratch 
the surface or erases characters.

If the terminals on the unit or faceplate get dirty, wipe 
them with a clean soft dry cloth.

When you turn on the car heater in cold weather, 
dew or condensation may form on the lens in the 
CD player of the unit. Called lens fogging,  this 
condensation on the lens may not allow CDs to play. 
In such a situation, remove the disc and wait for the 
condensation to evaporate. If the unit still does not 
operate normally after a while, consult your Kenwood 
dealer.

•  If you experience problems during installation, 

consult your Kenwood dealer.

•  When you purchase optional accessories, check with 

your Kenwood dealer to make sure that they work 
with your model and in your area.

•  Characters that conform to ISO 8859-1 can be 

displayed.

•  Characters that conform to GB2312 or ISO 8859-1 

can be displayed. Refer to “MENU” > “Chinese” of 
<Function Control> (page 6). 

•  In this document, the description indicator will light 

means a status is displayed. Refer to <About Display 
Type> (page 8) for the details of the status display.

•  The illustrations of the display, the function icon and 

the panel appearing in this manual are examples 
used to explain more clearly how the controls are 
used. Therefore, what appears on the display in the 
illustrations may differ from what appears on the 
display on the actual equipment, and some of the 
illustrations on the display may be inapplicable.

•  Do not touch the recording surface of the CD.
•  Do not stick tape etc. on the CD, or use a CD with 

tape stuck on it.

•  Do not use disc type accessories.
•  Clean from the center of the disc and move 

outward.

•  When removing CDs from this unit, pull them out 

horizontally.

•  If the CD center hole or outside rim has burrs, 

use the CD only after removing the burrs with a 
ballpoint pen etc.

•  CDs that are not round cannot be used.

•  CDs with coloring on the recording surface or CDs 

that are dirty cannot be used.

•  This unit can only play the CDs with 

. 

  This unit may not correctly play discs which do not 

have the mark.

•  You cannot play a CD-R or CD-RW that has not been 

finalized. (For the finalization process refer to your 
CD-R/CD-RW writing software, and your CD-R/CD-
RW recorder instruction manual.)

B64-4044-00_00_M_English.indd   3

B64-4044-00_00_M_English.indd   3

08.2.14   2:30:32 PM

08.2.14   2:30:32 PM