Pentax 43WR Manual Do Utilizador
112
10
Appendix
Messages
The following messages may be displayed on the LCD monitor during
camera operation.
Alarm set
This is displayed when the alarm is set and the camera is
about to be automatically turned off.
about to be automatically turned off.
Battery depleted
The battery is exhausted.Replace the battery.(p.13)
Camera cannot display
this image
this image
You are trying to play back an image not supported by this
camera.You may be able to display this on a PC or another
brand of camera.
camera.You may be able to display this on a PC or another
brand of camera.
Card locked
The SD Memory Card is write protected. (p.19)
Card not formatted
The SD Memory Card you have inserted is unformatted or
has been formatted on a PC or other device and is not
compatible with the camera.(p.97)
has been formatted on a PC or other device and is not
compatible with the camera.(p.97)
Compression error
Compression of the image you captured has failed.Change
the recorded pixels or quality level, and take a picture again.
the recorded pixels or quality level, and take a picture again.
Data being recorded
The image/voice recording is being recorded on the SD
Memory Card.
Memory Card.
Data error
Displayed when the printer was unable to process the data
in PictBridge mode.
in PictBridge mode.
Deleting
An images or sound on the SD Memory Card is being
deleted.
deleted.
Formatting
The SD Memory Card is being formatted.
Image folder could not
be created
be created
The maximum file number has been used, and no more
images or sound can be saved.Insert a new SD Memory
Card or format the card.(p.16, 97)
images or sound can be saved.Insert a new SD Memory
Card or format the card.(p.16, 97)
Image protected
This is displayed when you try to delete a protected image.
Memory card error
Shooting and playback are impossible due to a problem
with the SD Memory Card.Try displaying it on a PC.
with the SD Memory Card.Try displaying it on a PC.
Memory card full
The SD Memory Card memory is full and no more images
or sound can be saved.Insert a new SD Memory Card or
delete unwanted images or sound.(p.16, 79)
You may be able to save the image by changing the quality
level or recorded pixels.(p.40, 41)
or sound can be saved.Insert a new SD Memory Card or
delete unwanted images or sound.(p.16, 79)
You may be able to save the image by changing the quality
level or recorded pixels.(p.40, 41)
No card in camera
An SD Memory Card has not been inserted into the
camera.(p.16)
camera.(p.16)
No image & sound
There are no images or sound saved in the SD Memory
Card that can be played back.
Card that can be played back.
No ink
Displayed when the printer is out of ink in PictBridge mode.
00_Optio43WR-E.book Page 112 Tuesday, April 6, 2004 4:40 PM