Sanyo PLC-XF47K Manual Do Utilizador

Use the Point 7 8 buttons to select the desired Auto picture 

control position (Off, L1 or L2).

  Off  . . . .  Auto picture control OFF position.

  L1 . . . . .  Auto picture control LEVEL 1 position.

  L2 . . . . .  Auto picture control LEVEL 2 position.

Clear the check mark if you do not want to apply the 

adjusted color data; select the check mark and then press 

the SELECT button. The check mark disappears.

Return to the COLOR MANAGEMENT POINTER. (If you 

press the MENU button on the side control or the remote 

control, it returns to the COLOR MANAGEMENT POINTER 

and you will need to reselect and readjust the color.)

Return to the IMAGE ADJUST Menu. Any settings that 

have been changed will not be stored. To store the 

changed settings, be sure to select “LIST” and go to the 

COLOR MANAGEMENT LIST.

LIST MODE

Return to the COLOR SELECTION mode so that you can 

readjust the setting for the color in that line. (This option is 

not available if the check mark is cleared.)

Select the DEL box if you want to delete the adjusted 

data. Press the SELECT button and a confirmation box 

appears and then select [Yes] 

Delete all the data in the list. Press the SELECT button and 

a confirmation box appears and then select [Yes].

The same function as stated above.

Level and phase 

adjustment palette.

Gamma 

adjustment palette.

Use the Point 7 8 buttons to select the desired Color temp. 

level (High, Mid, Low, or XLow). 

COLOR SELECTION MODE

LIST MODE

COLOR SELECTION MODE (continued)

In the COLOR MANAGEMENT LIST, the adjusted color 

data are checkmarked. You can decide whether or not to 

apply the adjusted color data in the list to the projected 

image (see below).

The same function as stated above.