Sanyo PLC-XF47K Manual Do Utilizador

After a correct Logo PIN code is 

entered, the following dialog box 

appears.

Use the Point 7 8 buttons to switch On/Off,

This function prevents an unauthorized person from changing 

the screen logo.

  Off  . . . .  The screen logo can be changed freely from the 

Logo Menu.

  On  . . . .  The screen logo cannot be changed without a 

Logo PIN code.

If you want to change the Logo PIN code lock setting, press 

the SELECT button and the Logo PIN code dialog box appears. 

Enter a Logo PIN code by following the steps below. The initial 

Logo PIN code is set to “4321” at the factory.

Logo PIN code can be changed to your desired four-digit 

number. Press the Point d button to select “Logo PIN code 

change” and then press the SELECT button. The New Logo 

PIN code input dialog box appears. Set a new Logo PIN code.  

Be sure to note the new Logo PIN code and keep it at hand. If 

you lost the number, you could no longer change the Logo PIN 

code setting. For details on PIN code setting, refer to “PIN 

code lock” on pages 52–53.

Use the Point 7 8 buttons to switch On/Off, and then press 

the Point d button to move the pointer to “Quit.” Press the 

SELECT button to close the dialog box.

Use the Point 

ed

 buttons on the side control or on 

the remote control to enter a number.  Press the Point 

8

 button to fix the number and move the red frame 

pointer to the next box. The number changes to “✳.” 

Repeat this step to complete entering a four-digit 

number. After entering the four-digit number, move the 

pointer to “Set.” Press the SELECT button so that you 

can change the Logo PIN code lock setting.

 If you fixed an incorrect number, use the Point 

7

 button 

to move the pointer to the number you want to correct, 

and then enter the correct number.

If you entered an incorrect Logo PIN code, “Logo 

PIN code” and the number (✳✳✳✳) will turn red for a 

moment. Enter the correct PIN code all over again.