Sanyo VCC-HD4000 Manual Do Utilizador

■Rear Face

& For connections, see pages 11 and 12.

Control terminals

When connecting the cable, press and hold
down the protrusion of the terminal, insert the
cable into the terminal, and then release the
protrusion.

ZOOM terminal

Used to zoom in/out by connecting an
external switch.
• DC ±(6-12V), +: WIDE, –: TELE

FOCUS terminal

Used to perform the focus adjustment
remotely by connecting an external switch.
• DC ±(6-12V), +: FAR, –: NEAR

COM terminal (Earth terminal)

ALARM OUT terminal

Used to connect to an external buzzer or
lamp.
When an alarm is detected, the device
connected to the terminal notifies that an
alarm is detected.

ALARM IN 1/2 terminal

Used to connect an external alarm switch,
infrared sensor, or other device.
It can also be used as a switching terminal
for color and black/white video modes.

SD OUT connector (BNC type)

Outputs SD (Standard Definition) video.

AC24V / DC12V terminals

Connect this terminal to the power supply.
• When the camera is turned on, the

POWER lamp lights.

LAN connector (RJ-45)

Used to connect the camera to your network.

EX-HDD connector

Connects this connector to the external hard
disk case (VA-HDC4000) dedicated to use
with this camera.
For details, see the manual for the hard disk
case.

HDMI connector

Outputs HD (High Definition) video. Connect
this connector to an HD video device.

MEMO:

Select the SD OUT or HDMI terminal in on the
TV OUT SETTING screen via the network.

ALARM IN 1

ALARM

IN 2

ALARM OUT

ZOOM

FOCUS

POWER

AC24V

GND

12V

COM

OUT

EX-HDD

LAN