Sanyo POA-MD13NET2 Manual Do Utilizador

Select a display mode and login

This product provides 2 types of control mode, Graphic Mode and Text Mode as
the below. Select a proper mode to match your computer and network environ-
ment by clicking on the text link.

Displays with 600 x 400 dots and
the menus and settings with
graphic icons. This mode is rec-
ommended for standard use.

Displays with 200 x 300 dots. This
mode is optimized for use of the
handheld computer, PDA, etc. It is
also convenient if the network
traffic is heavy.

If the setting page has set the password, the authentication window will appear.
In this case type “user” onto the User Name text area and the login password
onto the Password text area and then press the OK button.
* The entering User Name must be “user” and it

cannot be changed.

[Note]
When accessing projector for the first time or setting the
no password [0000], the auto-login will be performed and
the next main setting page is displayed.

This chapter describes basic operations and settings for controlling the projector via a
network using this product. It is required that computer and projector are connected
to the network and the network address be properly configured.

Login the setting page of the projector

Enter the IP address

Launch the web browser installed in
your computer, enter the IP address into
the “Address” on the browser and the
press the “Enter” key.

Enter the IP address that you configured in chapter “Network Configuration” (

☞ p.16). The

default IP address is [192.168.0.2].