Sanyo POA-MD13NET2 Manual Do Utilizador

Network Board

OWNER’S MANUAL [HD Series]

The icons [A] and [B] represent the sensors located in the projector as follows:
[A]: Surrounding temperature of the projector*.
[B]: Surrounding temperature of the lamp.
* The indicated peripheral temperature of the projector is a little higher than actual surrounding

temperature.

Lamp Mode........Displays 2 lamps or 4 lamps mode

and lamp status as below icons with
Lamp1/Lamp2/Lamp3/ Lamp4 order.

Accumulated 
Lamp-use Time ..Displays the accumulated lamp

use time in hour units (h).

Accumulated 
Projector-use 
Time ..................Displays the accumulated pro-

jector use time in hour unit (h).

Power Status ....Displays the status of the lamp.
Projector 
Condition *

1

........Displays the status of the pro-

jector's power.

Check the status of projector

In the “Power & Status” page, you can control the projector power, and also you can
check the status of the projector as follows. To change the page, click on the page
number.

z

x

Input Status ......Displays the selected input

mode.

Selection............Displays the source mode of

selected input mode.

Signal Status ....Displays the signal status of the

selected input mode.

Internal 
temperature*

2

....Displays the temperature at

internal thermal sensors in
centigrade/ fahrenheit degrees. 

*1 

When occurring the internal power failure, The word “Power Failure” and its error information
code such as “FFFEFFFF” are displayed. Unplug the projector from AC outlet and ask servicing
to a qualified service personnel with this information code.

*2 The icons [A] and [B] on the page represent the thermal sensors located in the projector. If the tem-

perature at one of those sensors exceeds specified temperature, the appearance of its icon
changes to the following alert icon to let users know the abnormal temperature. Please check sur-
rounding temperature of the projector, the clogged air filters and the area surrounding the ventila-
tion fans.

White

Normal

Gray

Off

Red

Lamp replacement required

Gray with X

Abnormality of the lamp