Aleratec 330107 Manual Do Utilizador

www.aleratec.com

11

Compare

This function will compare the finished target USB flash drives to the source 

USB flash drive after copying is complete. The USB Duplicator supports 

Compare in both Synchronous, and Asynchronous modes.

In Synchronous Compare all USB flash drives are compared simultaneously. 

1.  When copying is complete and with the data source drive and the target 

USB flash drives still loaded in the USB Duplicator, use the UP or 

DOWN arrow to scroll through the menu until Compare is displayed on 

the LCD screen.

2.  Press the OK button on the display panel to select Compare. The LCD 

will display the following status:

3.  Press OK again and the Compare will start as shown in the display below.

Note: When Compare is in process the Green LED on the front panel 
is blinking. Do not take out the drive while it is running a comparison. 
When Compare is finished the Green LED stays on (no blinking). If an 
error occurs during the copy process a Red LED will display. 























