Siemens optipoint 410 s v6.0 Manual Do Utilizador

 A31003-J4260-M101-2-76A9, 03-2007

XML Configuration Management, Administrator Manual

   

   

   

xml_02.fm

If the configuration download setup program is not available, for example, if a configuration up-
date server has not been installed, the phone does not initiate a download. In this case, an al-
ternative procedure must be used for the configuration update.

Configuration files are stored on the configuration server. There are two kinds of configuration 
files.

The system configuration file has a unique name for every phone model (for example, 
op410adv_conf.xml). This file does not contain any phone-specific parameters (see 

Each device configuration file name contains the MAC address of the corresponding phone (for 
example, op410adv_conf001E300A9F3.xml). This file only contains phone-specific parame-
ters (see 

Every phone expects a default account named "config" on the FTP server with the password 
"config" (the plug-and-play settings are also located in the "Configuration management set-
tings" dialog on the phone’s Web interface 

page 4-25). Once the configuration files have 

been downloaded, the phone checks the file versions. To do this, it searches for a "system-
config-version" tag in the system configuration file and a "device-config-version" tag in the de-
vice configuration file.

The phone then compares the system configuration file version with the version in the last 
download. If the version has changed, the phone executes the write instructions in the system 
and device configuration files

If the system configuration file version has not changed but the device configuration file version 
has, the phone only executes the write instructions from the device configuration file. If neither 
version has changed, the action is terminated.