Ariens 936305-313 Manual Do Utilizador

Página de 66
2 - 4
1.7  PREPARATION
Before starting any removal of parts, proper 
preparation is very important for efficient work. A clean 
work area at the start of each job will allow you to 
perform service repairs easily and quickly.
To reduce the incidence of misplaced tools or parts, 
place removed components with all attaching hardware 
in the disassembly order on a clean work surface. 
Organization is a key part of proper reassembly.
Tools, instruments, and parts needed for the job should 
be gathered before work is started. Interrupting a job to 
locate tools or parts is a needless delay. 
2.1  SAFETY ALERTS
Look for these symbols to point out 
important safety precautions. They 
mean:
Attention!   
Personal Safety Is Involved!
Become Alert! 
Obey The Message!
2.2  SIGNAL WORDS
The safety alert symbol is used in decals on the unit 
and with proper operation procedures in this manual. 
They alert you to the existence and relative degree of 
hazards. 
Understand the safety message. It contains important 
information about personal safety on or near the unit. 
2.3  NOTATIONS
NOTE:  General reference information for proper oper-
ation and maintenance practices.
IMPORTANT: Specific procedures or information 
required to prevent damage to unit or attachment.
2.4  PRACTICES AND LAWS
Practice usual and customary safe working 
precautions, for the benefit of yourself and others. 
Understand and follow all safety messages. Be alert to 
unsafe conditions and the possibility of minor, 
moderate, or serious injury or death. Learn applicable 
rules and laws in your area.
2.5  REQUIRED OPERATOR TRAINING
Original purchaser of this unit was instructed by the 
seller on safe and proper operation. If unit is to be used 
by someone other than original purchaser; loaned, 
rented or sold, ALWAYS provide the Operator’s Manual 
and any needed safety training before operation.
2.6  SAFETY PRECAUTIONS
Safe Operation Practices for Ride-On Mowers
This cutting machine is capable of amputating hands 
and feet and throwing objects. Failure to observe the 
following safety instructions could result in serious 
injury or death. Your complete and unimparied 
attention is required at all times.
General Operation
Read, understand, and follow all instructions in this 
owners manual, the engine manual and on the 
machine before starting. 
Only allow responsible adults, who are familiar with the 
instructions, to operate the machine.
Clear the area of objects such as rocks, toys, wire, etc., 
which could be picked up and thrown by the blade.
Be sure the area is clear of other people and pets 
before mowing. Stop machine if anyone enters the 
area.
Never carry passengers.
Do not mow in reverse unless absolutely necessary. 
Always look down and behind before and while 
backing.
Be aware of the mower discharge direction and do not 
point it at anyone. Do not operate the mower without 
either the entire grass catcher or the guard in place.
Slow down before turning to prevent tipping or loss of 
control.
Never leave a running machine unattended. Always 
turn off blades, set parking brake, stop engine, and 
remove keys to prevent unauthorized use before 
dismounting.
Turn off blades when not mowing.
SECTION 2 - SAFETY
DANGER: IMMINENTLY HAZARDOUS 
SITUATION! If not avoided, WILL RESULT in 
death or serious injury. 
WARNING: POTENTIALLY HAZARDOUS 
SITUATION! If not avoided, COULD RESULT 
in death or serious injury. 
CAUTION: POTENTIALLY HAZARDOUS 
SITUATION! If not avoided, MAY RESULT in 
minor or moderate injury. It may also be used 
to alert against unsafe practices.