Epson equity ie q50188015-1 Manual Do Utilizador

If you are running the MENU utility from a diskette rather than a hard

disk, when you select a specific operation the screen displays a message
similar to this:

MODE.COM is not on the current disk or PATH

Press any key to continue...

At this point you need to switch to the Startup/Operating 1 diskette for the

remainder of the operation. Remove the Operating 2 diskette from drive A

and replace it with the Startup/Operating 1 diskette and then press any key.

The screen that was displayed before reappears and you can continue the

operation.

There are two alternatives to the disk-swapping described above:

l

Create a MENU diskette containing all the files necessary to run the
MENU utility. To do this, you need to understand more about how the

MENU utility is structured. See your MS-DOS manual for details.

l

Before you run the MENU program, type PATH B : at the A > prompt

and press 

Enter. 

Then when you run the MENU program, the screen

prompts you when to insert the diskette for drive B. At that point,

insert the Startup/Operating 1 diskette in drive A if you have only one
drive or drive B if you have two drives. Press any key to continue.

Below is a description of what each option does. Step-by-step instructions for

using each option are provided in your MS-DOS manual.

File Utilities

Lets you back up and restore files, replace files,
compare files, change file attributes, copy files,

and copy directories. This option does the

work of these MS-DOS commands: BACKUP
RESTORE, REPLACE, FC, ATTRIB, and
XCOPY.

DiskUtilities

Lets you check, copy, compare, and format
diskettes. This option provides an easy-to-use