Epson PowerLite 1735W Manual Do Utilizador

There are two methods of connecting the projector and a computer via 
a network by using EMP NS Connection.

f

"Quick Connection Mode" only runs when you install the supplied 
"Wireless LAN unit" in the projector.
"Quick connection mode" temporarily assigns the projector's SSID to a 
computer creating an ad hoc connection, and after disconnecting restores 
the computer's network settings. 

  

• You can easily connect to a computer and project images from the 

computer without making network settings.

• This lets you connect easily without a connector cable, and you can 

connect even if the projector and the computer are at remote locations.

f

"Advanced Connection Mode" is an infrastructure connection, and 
connects to an existing network system via a network cable.
If you install the supplied "Wireless LAN unit" in the projector, you can 
connect to the network via a wireless LAN access point. If you install the 
optional "Ethernet unit" you can connect to a network without an access 
point. When connecting to a network via the Ethernet unit, connect the 
projector to the network hub with a commercially available LAN cable.

  

• From a conference room, you can open and project a file stored on a 

computer or file server in another room.

• You can use the Internet.
• You can monitor and control projector's on a network from the 

computer.

Supplied Wireless LAN unit

Wi-Fi compliant wireless 
LAN card or wireless LAN 
enabled computer

Internet

LAN