SATURN 2009 vue hybrid Manual Do Utilizador
Transferring a Call
Audio can be transferred between
the in-vehicle Bluetooth system
and the cell phone.
the in-vehicle Bluetooth system
and the cell phone.
To Transfer Audio to the Cell
Phone
Phone
During a call with the audio in the
vehicle:
vehicle:
1. Press
J
/
0
. The system
responds with “Ready” followed
by a tone.
by a tone.
2. Say “Transfer Call.” The system
responds with “Transferring call”
and the audio will switch from
the vehicle to the cell phone.
and the audio will switch from
the vehicle to the cell phone.
To Transfer Audio to the
In-Vehicle Bluetooth System
In-Vehicle Bluetooth System
The cellular phone must be paired
and connected with the Bluetooth
system before a call can be
transferred. The connection process
can take up to two minutes after
the key is turned to the ON/RUN or
ACC/ACCESSORY position.
and connected with the Bluetooth
system before a call can be
transferred. The connection process
can take up to two minutes after
the key is turned to the ON/RUN or
ACC/ACCESSORY position.
During a call with the audio on the
cell phone, press
cell phone, press
J
/
0
for more
than two seconds. The audio
switches from the cell phone to the
vehicle.
switches from the cell phone to the
vehicle.
Voice Pass-Thru
Voice Pass-Thru allows access to
the voice recognition commands on
the cell phone. See the cell
phone manufacturers user guide to
see if the cell phone supports
this feature. This feature can be
used to verbally access contacts
stored in the cell phone.
the voice recognition commands on
the cell phone. See the cell
phone manufacturers user guide to
see if the cell phone supports
this feature. This feature can be
used to verbally access contacts
stored in the cell phone.
1. Press and hold
J
/
0
for
two seconds. The system
responds with “Ready” followed
by a tone.
responds with “Ready” followed
by a tone.
2. Say “Bluetooth”. The system
responds with “Bluetooth
ready” followed by a tone.
ready” followed by a tone.
3. Say “Voice”. The system
responds with “OK, accessing
<phone name>”.
<phone name>”.
•
The cell phone’s normal
prompt messages will
go through its cycle according
to the phone’s operating
instructions.
prompt messages will
go through its cycle according
to the phone’s operating
instructions.
Dual Tone Multi-Frequency
(DTMF) Tones
(DTMF) Tones
The in-vehicle Bluetooth system can
send numbers and numbers stored
as name tags during a call. This is
used when calling a menu driven
phone system. Account numbers can
be programmed into the phonebook
for retrieval during menu driven calls.
send numbers and numbers stored
as name tags during a call. This is
used when calling a menu driven
phone system. Account numbers can
be programmed into the phonebook
for retrieval during menu driven calls.
Sending a Number During a Call
1. Press
J
/
0
. The system
responds with “Ready” followed
by a tone.
by a tone.
2. Say “Dial”. The system responds
with “Say a number to send
tones” followed by a tone.
tones” followed by a tone.
3-80
Instrument Panel