Tektronix 2200 Manual Do Utilizador
4-20
Section 4— Switcher Operations
Setting Transition Rates
You can adjust the transition rate for an auto transition or Key
mix(DSK mix on the 4000-2B) using any rate from 1 to 999 frames:
mix(DSK mix on the 4000-2B) using any rate from 1 to 999 frames:
1.
In the E-MEM Subpanel , select
TRAN
RATE
. The query:
SET WHICH RATE?
displays.
2.
Delegate to the Transition subpanel that you want to set an
auto transition rate for by pressing
auto transition rate for by pressing
M/E 1, ME/2, PGM/PST,
or
DSK
. You can change all at once by pressing
ENABL ALL
.
3.
The display queries:
RATE
= ?
4.
Use the E-MEM numeric keypad to enter the number of
television frames for the transition rate. Enter a rate from
0 - 999.
television frames for the transition rate. Enter a rate from
0 - 999.
5.
Press
ENTER
to complete the rate entry. (If 3 numbers are used
the completion is automatic. If less than 3 numbers are
entered, complete the entry with the
entered, complete the entry with the
ENTER
button.) The
transition rate shown in the rate display near the associated
transition controls changes to the new rate.
transition controls changes to the new rate.
NOTE:
Steps 6 – 9 apply only to Models 3000-3, 4000-2A, and 4000-3.