Tektronix 2200 Manual Do Utilizador
4-44
Section 4— Switcher Operations
New Operational Mode Available – Version 5.1 and later
Version 5.1 added a new operational mode to the existing mode on
the E-MEM system:
the E-MEM system:
■
Normal mode – pre-existing functionality
■
300 Style mode – functional only for 3-M/E Switchers
This mode setting is found in
CONFIG/USER PREFS/E-MEM
PREFS/
menu under the
MASTER E-MEM
selection.
This document discusses the Normal mode operation first, then
the Model 300 Style mode.
the Model 300 Style mode.
NOTE:
If you have a 2-M/E Switcher, your system operates only in
Normal mode.
Normal Mode
In Normal mode on a 2 M/E Switcher, when you do a Learn or
Recall, individual M/Es are simply levels in the Master E-MEM
register.
Recall, individual M/Es are simply levels in the Master E-MEM
register.
In Normal mode on a 3 M/E Switcher, when you do a Learn or
Recall, the Master E-MEM forces all individual enabled M/Es to
align with the same register that the Master E-MEM is pointing to
and causes the individual M/Es to learn the current Switcher
setup into those aligned registers.
Recall, the Master E-MEM forces all individual enabled M/Es to
align with the same register that the Master E-MEM is pointing to
and causes the individual M/Es to learn the current Switcher
setup into those aligned registers.