Tektronix 2200 Manual Do Utilizador
2-10
Section 2— Startup and Configuration
be a shifted crosspoint. The SHIFT button light will remain
ON while the bus is in this state.
ON while the bus is in this state.
To unshift a bus, press and hold the SHIFT button. Select a
crosspoint button. The bus is now unshifted, and the
SHIFT
crosspoint button. The bus is now unshifted, and the
SHIFT
button lamp is OFF.
3.
Select the
KEYER PREFS >
submenu.
Setting Keyer Preferences
From the User Preferences Menu, press the
KEYER PREFS>
button to
display the Keyer Preferences Menu:
1.
The
DSK DROP
button allows you to enable or disable DSK
Drop mode. DSK Drop mode ON drops any DSK when a
program bus crosspoint is pressed. (This is usually left OFF.)
program bus crosspoint is pressed. (This is usually left OFF.)
2.
The
KEY MEMORY
Button allows you to turn on or off the key
memory feature. ON enables crosspoints to remember all key
settings. (This is usually left ON.)
settings. (This is usually left ON.)
KEYER PREFS MENU
config/user prefs/keyer prefs
KEY
MEMORY
CLEAR KEY
MEM>
DSK
DROP
ON
ON
OFF
OFF