Tektronix 2200 Manual Do Utilizador

2-26

Use the Analog Video Inputs Menu to select the component 
format with setup or no setup for each analog video input.

1.

From the Inputs Menu, press the 

button to 

select the Analog Video Inputs Menu as shown below.

2.

Increment the 

button until you reach the video 

input you want to assign. There are 2 video inputs per card. In 
the menu above a format is assigned to the video inputs on 
Card 2 for inputs 37 and 39.

3.

After formatting the input, you must determine whether the 
video input requires SETUP or NO SETUP. Do this by selecting 
ON 

or OFF for each input. The SETUP selection sets all outputs 

for a black level 7.5 IRE above blanking. The NO SETUP 
selection puts black at blanking level.